Undercar fuel swirl pot

[c20tbo]

Guys,

Who does these, need one with single -6 outlet to rail.

Also whats best to plumb these in, can new manufactured steel fuel lines have a -6 fitting braized on, or is it a case of going normal braided hoses and new clips

Thanks Robert


Sent from my iPhone using Tapatalk

[Davecos 4x4]

Rob,

I have one under the rear bumper, passenger side, feeding a 044 onto the fuel rail.

can get pics if you want them to see how its done, maybe get a tank made then.

pretty sure NMS did the job.

[c20tbo]

Dave, yeah if you could, just thought the normal under car one was the easiest, I'm sure SCS do them.


Sent from my iPhone using Tapatalk

[800bhp]

Why not put 450LPH Walbro in tank? Thats what Mark is doing on mine no need for 2 pumps.

[Davecos 4x4]

swirl pot looks like the one Mike had in this post Rob.

http://passionford.com/forum/ford-rs...t-up-sold.html

[Davecos 4x4]

Why not put 450LPH Walbro in tank? Thats what Mark is doing on mine no need for 2 pumps.

it will still get fuel starvation on hard cornering as the tanks are crap on the escorts.

[georgie1]

Guys,

Who does these, need one with single -6 outlet to rail.

Also whats best to plumb these in, can new manufactured steel fuel lines have a -6 fitting braized on, or is it a case of going normal braided hoses and new clips

Thanks Robert


Sent from my iPhone using Tapatalk

cossiedavid

[800bhp]

it will still get fuel starvation on hard cornering as the tanks are crap on the escorts.

Your may be right if you planning on useing on track

[c20tbo]

Why not put 450LPH Walbro in tank? Thats what Mark is doing on mine no need for 2 pumps.

Id rather play it safe and have a swirl pot.

[c20tbo]

cossiedavid

Cant supply for a single order

[Davecos 4x4]

Your may be right if you planning on useing on track

you can do a lot of hard cornering on the roads too.

[c20tbo]

swirl pot looks like the one Mike had in this post Rob.

http://passionford.com/forum/ford-rs...t-up-sold.html

Ah ok Dave, Torques can supply one like this also

[Davecos 4x4]

just need to bolt the fuel pump under the car and plumb it all in.

new fuel loom and fuses ect...too Rob aswell.

[Adamski]

Ah fabrications will make you anything you want I can give you lars number if you want rob...

[c20tbo]

just need to bolt the fuel pump under the car and plumb it all in.

new fuel loom and fuses ect...too Rob aswell.

Yeah thats the plan Dave, id also like to buy new fuel lines and have -6 fittings put on so its neater and i can use oe clips to fasten