Car wont start after replacing fuse box

[mboon]

guys,

car wont even try and turn over after putting in a new fuse box. I have replaced everything where it should be, took my time and took photos.

Fuel pump sounds like it is not even priming and nothing from the starter motor.
Ignition comes on and a few bits I have tried, ie heater fan, electric windows etc all working. All lights on the dash are working and the dials. Just cannot get it to start or even try and start?

The imobilizer light on my clock is going off after a few seconds as it should..... HELP PLEASE GUYS, NEED THIS BACK ON THE ROAD ASAP

THANNKS

MAKR

[Ben Purnell]

Mark maybe give Mark a call he may well be able to advise there and then over the phone

[Scouse]

Are the supply feeds into the fuse box secure and do you have feed there (12v). Check the fuses at the battery end.


Scouse.

[The Radman]

have you reconnected the starter cable to the battery?

[the youth]

Refit the old fuse box and make sure it starts

Steve

[Dave]

Refit the old fuse box and make sure it starts

Steve

This is what I'd do tbh