Loom

[wicksee]

I need an engine loom so I've inquired about having a loom made by cw looms they ask if I wanted a knock sensor and lambda put on the loom and I'm not really sure I'm using an L8 ecu do I need these put in to the loom ? They also said that they would need to borrow an Escos loom as They have nothing to size it off as they sizing table got damage in a break in this I don't have I've only got a sierra 4x4 loom with the three plugs on the end can this loom be used in my car?

[Kelv]

It would depend if your chip/program has been written to work with these sensors.
Do you have a lambda sensor fitted in the top of the downpipe, or in the turbo exhaust housing?

[wicksee]

No mate I have no lambda fitted at the mo but I can if it will make it run better I was thinking of getting a msd chip

[wicksee]

Would it be better just to get these bits put on as I still got to get the car running first and run in before I start choosing the tuner?

[warrenpenalver]

ive got some measurements from a ryan loom i measured up if he needs something to start with

[mikedaf2]

I would have all sensors put in the loom as it wont hurt if you dont use them and then you have them if needed later

[wicksee]

ive got some measurements from a ryan loom i measured up if he needs something to start with

Thanks mate yeah I ring them and put it to them see what they say

[warrenpenalver]

Its jim cellears escos ryan loom IIRC



Its not the neatest picture but it is my hand scribblings

[wicksee]

Looks interesting thanks

[FRASER]

Its jim cellears escos ryan loom IIRC

http://i6.photobucket.com/albums/y20.../IMAGE0001.jpg

Its not the neatest picture but it is my hand scribblings

It's not Ryan's loom it's one of mine that I did for Wenny's MK3 Escort.

[Paul RS]

Get the knock sensor and lambda wiring included - If you don't use them, simply don't plug them in!

That's how i ordered my Prometheus loom and i eventually ended up using the extra connections.

[warrenpenalver]

It's not Ryan's loom it's one of mine that I did for Wenny's MK3 Escort.

I stand corrected

[jamest8]

Call Mark at Bespoke Looms, he can sort this for you

[wicksee]

I found bespoke looms today on the Internet turns out there about 10 miles away from me

[jimcallear]

Warrens drawings are for a Ryan's loom as I had a spare in the boot of the car