If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
can you tell me what size of a spec r intercooler is needed for a cosworth track/ race car with 711 hp and also is there any need for the use of water injection with the spec r intercoolers .
thanks steven
If you go for the 3.8inch one and the core is in clean air with no bumper in front of it I would expect no WI would be needed.
If you go for the 3.8inch one and the core is in clean air with no bumper in front of it I would expect no WI would be needed.
Mark
mark pete talked about a 3.5 inch one today on the phone or a 4 inch but said to big is bad something to do with back preasure .
domanic has a intercooler custom made by a company here in northern ireland in tommy grahams rally x fiesta and the temps on it is only in the late teens i think i am right in saying , and no need of water injection .
its 33 inches wide includeing the ends x 14 inchs tall x 3.5 inches thick . i do not no the name of the core used.
petes problem is he does the welding all himself and this slows it right down he needs to get a welder i told him this before i know its hard to find someone good,,, however i was meant to be having a phone call 2 weeks ago for booking in for tomorrow yet no call, rang last week twice with no answer... at a guess i think people call him desperate for stuff this week and he does it to be nice to help however this slows his other orders down that have been placed before. petes a nice guy however i know he comes on here or sees things like this i will be open and say i'll be calling him in the next day or so and i expect it going in in the next week i've had enough waiting now.... I have been patient as i had other things going on so i told him last year no rush he's told me about 3 times since he'll make arrangements to do mine and hasn't.... like i said not gonna slate the guy but he really needs to stop trying to fit everyone in and do things one by one and not take money until then! As he's had £400 off me from day one so its been sat in his account not mine since then...
well i spoke to pete today i will be dropping my car there this week sometime so should be done next week, he is just very busy but he really needs to get help its not physically healthy to carry on as he is... he'l either have to turn work away or get help or have a breakdown! that all said as said he is helpful and a nice bloke just needs to sort his current situation.
mark pete talked about a 3.5 inch one today on the phone or a 4 inch but said to big is bad something to do with back preasure .
domanic has a intercooler custom made by a company here in northern ireland in tommy grahams rally x fiesta and the temps on it is only in the late teens i think i am right in saying , and no need of water injection .
its 33 inches wide includeing the ends x 14 inchs tall x 3.5 inches thick . i do not no the name of the core used.
thanks steven
Why do you keep comparing cars that are running nearly 200bhp less than yours ?
A rally-cross car has a restrictor which limits power to a maximum of 540bhp, so an intercooler that does late teens on something like that is not comparable with your engine. Just fit what Pete suggests and don't consider anything else that is for lower spec cars .
Mike Rainbird Click above - Sarcasm is just a free service I provide.
Comment