f a o mark shead spec r intercoolers

[steven mc kay]

mark i no you use spec r coolers alot .

can you tell me what size of a spec r intercooler is needed for a cosworth track/ race car with 711 hp and also is there any need for the use of water injection with the spec r intercoolers .

thanks steven

[SCS j1mbo]

Steve there is a few different sizes. Dimensions 24" x12" x3.5" or same but 4" deep and same again but even deeper iirc, biggest one you can get in steve is what you want. Shouldn't be a need for w/I but we can always put it in the t6 2000 just incase

[steven mc kay]

Steve there is a few different sizes. Dimensions 24" x12" x3.5" or same but 4" deep and same again but even deeper iirc, biggest one you can get in steve is what you want. Shouldn't be a need for w/I but we can always put it in the t6 2000 just incase

i think there is plenty of room ok jim , i need pete to supply me the cooler made up less the pipe work to the inlet and turbo welded in place . domanic will work out what bends and pipe work is needed and if pete supplys it with cooler we can have it welded in place over here ,
its very hard to get the cooler fitted and have pipe work in the correct place with out pete haveing the car .

domanic has a chap that can tack the pipe work in place on site and take it away to weld up.

jim what size pipe work is used from cooler to inlet and cooler to turbo.

thanks steven

[Davecos 4x4]

i bought one for my car hoping to save on the water injetion.

Dave fitted a Spec R on his escort Steven and had no problems.

[Davecos 4x4]

if i use my spec r cooler on my escort at the moment in place of my pro alloy one...will i have to get it checked over and remapped.

[steven mc kay]

[QUOTE=Davecos 4x4;402509]i bought one for my car hoping to save on the water injetion.

dave have you yours fitted yet any photos .

the good thing about the spec r coolers are theres room some times for the cone filter to sit on top of it and get direct air into it ..

thanks steven

[Davecos 4x4]

No not fitted yet Steve, hence my other post above.

can take pics of it or measurement if you need them.

[Davecos 4x4]

Paul Linfoot has got pics of the Spec R stuff fitted in the escort breaking thread...maybe of use.

[steven mc kay]

spoke to pete at spec r , today. i had sent him a text satuarday not to expect a reply to monday and he text to day saying give him a phone if i wanted , what a nice chap so so help full , he was even working today , says he works 7 days per week.

well the intercooler is no problem for him to sort . he needs the size between the chassi legs and the size from the top of the pipe on my inlet to the bottom of the grill on the front bumpber along with a few photos and he says thats enought for him to make it all up . only thing i will need to do is get the mounting brackets welded on .

the size of the cooler i need is 24 inches wide around 31 inches with the ends fitted around 18 inch high he thinks from doeing one in jullian godferrys car and 3.5 inch deep .

all yous boys are so luck liveing in uk as yous can all take your cars to have them custom fitted at spec r.

thanks steven

[Davecos 4x4]

will be months waiting probably.

[cossiedavid]

i think there is plenty of room ok jim , i need pete to supply me the cooler made up less the pipe work to the inlet and turbo welded in place . domanic will work out what bends and pipe work is needed and if pete supplys it with cooler we can have it welded in place over here ,
its very hard to get the cooler fitted and have pipe work in the correct place with out pete haveing the car .

domanic has a chap that can tack the pipe work in place on site and take it away to weld up.

jim what size pipe work is used from cooler to inlet and cooler to turbo.

thanks steven

your be lucky if pete will do that m8 he likes to do the hole job

[steven mc kay]

will be months waiting probably.

he told me today on the phone at this time of year he is makeing orders for the cooler core"s every week so hes got a good supply of them . makeing a cooler to my spec is a 2 week turn around .

this is the mans words ..

thanks steven

[steven mc kay]

your be lucky if pete will do that m8 he likes to do the hole job

he said hes got no problem being of any help he can be and will make it all up apart from welding on the mounting brackets which he will supply .

thanks steven

[Davecos 4x4]

why has Adams one taken 6 months then.

hopefully he can keep up with his workload.

[cossiedavid]

why has Adams one taken 6 months then.

hopefully he can keep up with his workload.

and still waiting i think