If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
4.4m 200 series -08 braided nitrile hose
One 200 series cutter fitting -08 90°
One 200 series cutter fitting -08 straight
One adaptor male-male 9/16 JIC to ¾" JIC
4.7m 200 series -06 braided nitrile hose
One 200 series cutter fitting -06 90°
One 200 series cutter fitting -06 straight
One adaptor male-male straight -06 to -06
1.5m 200 series -06 braided nitrile hose
One 200 series cutter -06 straight
One hose finisher -06 blue
1.25m 200 series -06 braided nitril hose
Two 200 series cutter -06 straight
One adaptor 9/16 JIC to M12 x 1.5
One plug port -06 JIC socket hex
One Adaptor ¾" JIC to M12 x 1.5
Two 200 series cutter -08 90°
Mike Rainbird Click above - Sarcasm is just a free service I provide.
WOT was using solid alloy pipes in -6 for supply and return on his car that i spotted at the weekend would be cheaper and he had aeroquip mounted on the end of it
4.4m 200 series -08 braided nitrile hose
One 200 series cutter fitting -08 90°
One 200 series cutter fitting -08 straight
One adaptor male-male 9/16 JIC to ¾" JIC
4.7m 200 series -06 braided nitrile hose
One 200 series cutter fitting -06 90°
One 200 series cutter fitting -06 straight
One adaptor male-male straight -06 to -06
1.5m 200 series -06 braided nitrile hose
One 200 series cutter -06 straight
One hose finisher -06 blue
1.25m 200 series -06 braided nitril hose
Two 200 series cutter -06 straight
One adaptor 9/16 JIC to M12 x 1.5
One plug port -06 JIC socket hex
One Adaptor ¾" JIC to M12 x 1.5
Two 200 series cutter -08 90°
shitsounds expensive lol the joys of aeroquip. thanks mike
Comment